WEBVTT

00:00.000 --> 00:03.742
Inside a 0.5 Ampere curve D magnetic-thermal circuit breaker

00:03.742 --> 00:10.152
In France (unless stated otherwise) the supply comes in at the top (Germany: the opposite)

00:10.152 --> 00:16.239
First, the current goes through a resistive wire wrapped around a strip

00:16.239 --> 00:23.879
As it heats, the strip bends (manufacturer's adjustment screw at top right)

00:23.879 --> 00:33.255
The thermal part measures the heating caused by the current flowing

00:33.255 --> 00:40.360
It takes time for the heat to be transferred and trip the mechanism

00:40.360 --> 00:48.530
So the thermal part ONLY protects against overloads!

00:48.530 --> 00:55.495
It cannot protect against short circuits: we have seen that 0.01 to 0.02 s is required on a short circuit!

00:55.495 --> 01:15.992
Careful: the thermal part, used in very cold or, conversely, very hot conditions, is thrown off!

01:15.992 --> 01:24.573
Next comes the arc chute

01:24.573 --> 01:35.945
On opening, the arc must spread into this chute, which absorbs it by stretching it

01:35.945 --> 01:44.180
Then the current flows through the coil (electromagnet)

01:44.180 --> 01:54.876
Here, curve D, at 10 to 14 In, so between 5 and 7 Amperes, this electromagnet...

01:54.876 --> 02:02.182
...trips the mechanism instantly (≈ 1/100 of a second, 0.01 to 0.02)

02:02.182 --> 02:11.226
And the output at the bottom

02:11.226 --> 02:25.813
Here is our transparent teaching magnetic-thermal circuit breaker
